Hotel Signs in Phoenix and Scottsdale: The Complete Checklist

Hotel Signs in Phoenix and Scottsdale: The Complete Checklist

By Ken Galvin | President, Phoenix Sign Studio

What Signs Does a Phoenix or Scottsdale Hotel Need?

A Phoenix or Scottsdale hotel needs exterior identification that guests can find from the street, approved address numbers that meet the local fire code, clear parking and entrance directions, and interior wayfinding that gets guests from the front desk to their rooms. It also needs accessible room identification signs that meet the 2010 ADA Standards and the posted evacuation diagrams the fire code requires in hotel sleeping units.

Most hotels also add lobby, amenity, and event signs. The right mix depends on the number of buildings, how guests arrive, the amenities, and the city.

Hotel signage is not only about branding. A tired guest arriving at night has to find the entrance, the check in area, and the right room. Fire crews have to find the right building quickly. Guests who are blind or have low vision need room signs they can read by touch.

What Are the Essential Signs for a Phoenix or Scottsdale Hotel?

Sign CategorySign TypeWhen It Is Needed
IdentificationMonument or other freestanding signTo identify the property from the street and driveway
IdentificationBuilding wall signs and dimensional lettersTo identify the hotel on the building itself
Code requiredAddress and building identificationAll buildings, sized to the local fire code
Code requiredAccessible room identification signsAt permanent rooms and spaces, including guest room numbers
Code requiredEvacuation diagramsAt the required egress door of each hotel sleeping unit
Code requiredAccessible parking signsAt accessible parking spaces
Site dependentDriveway, parking, and drop off signsWhen guests must choose between entrances, lots, or valet
Guest experienceLobby and front desk signsTo confirm arrival and guide guests to check in
Guest experienceInterior wayfinding and directoriesWhen guests must find rooms, elevators, and amenities
Guest experienceAmenity and event signsWhen the hotel has a pool, fitness room, restaurant, or meeting space

Not every hotel needs every sign type. A two story, single building property has different needs from a resort with several buildings and a conference center.

Planning new hotel signs or updating a property after a renovation?

Schedule a Signage Consultation With Ken Galvin

1. What Exterior Signs Help Guests Find a Hotel?

Monument signs

A monument sign near the main entrance tells drivers they have arrived and where to turn. It should be placed and sized for the speed and direction of approaching traffic, not only for how it looks from the parking lot.

Building identification

Wall signs and channel letters or dimensional letters identify the hotel from a distance.

Should exterior hotel signs be illuminated?

For most hotels, yes, since many guests arrive after dark. Both cities regulate how signs may be lit. See why lighting choices make or break your sign after dark.

Can a Scottsdale hotel use a digital or electronic message sign outside?

No. Scottsdale does not allow exterior digital or electronic message displays for hotels. Plan static signs, and use illumination, size, and placement for visibility.

What about national brand standards?

A national brand may have its own sign standards, and those still have to fit within what the city allows.

2. What Address and Building Identification Does a Hotel Need?

Both Phoenix and Scottsdale build their address rules on Section 505.1 of the International Fire Code, and both have amended it.

Scottsdale address requirements

Scottsdale’s 2021 International Fire Code amendments require address and building numbers for commercial properties to be at least 12 inches high with a minimum 2 inch stroke, contrasting with the background, and plainly legible and visible from the street or road fronting the property.

The same section sets:

  • Units within a building: at least 6 inches high with a 1 inch stroke.
  • Individual unit or suite numbers: at least 4 inches high with a 1/2 inch stroke.
  • Interior room and suite numbers: at least 1 1/4 inches high with a 1/4 inch stroke.

Where access is by a private road and the building cannot be seen from the public way, Scottsdale calls for a monument, pole, or other sign or means to identify the structure.

Phoenix address requirements

Phoenix uses the 2024 International Fire Code with Phoenix amendments, effective February 17, 2026. Phoenix sets address sizes by building type. Both its commercial section and its section for residential buildings other than single family homes call for building addresses at least 12 inches high and require the address to be internally or externally illuminated.

On properties with more than one building, the residential section calls for each building to display its own letter or number designation, at least 18 inches high with a 3 inch stroke, visible from the fire apparatus access road and illuminated. It also calls for buildings more than 100 feet long to have at least two address numbers on opposite ends.

The section that applies depends on how the building is classified. Phoenix Sign Studio confirms the requirements for your property during permitting.

For more detail, see our article What Does My Building’s Address Sign Need to Meet Fire Code in Phoenix or Scottsdale?

3. What Parking, Driveway, and Drop Off Signs Does a Hotel Need?

Parking and driveway signs should guide guests before they reach a decision point. Depending on the property, they may identify the entrance and exit, check in parking, valet, self parking, event parking, deliveries, and accessible parking.

What do accessible parking signs need?

Under the 2010 ADA Standards for Accessible Design, accessible parking spaces must be identified by signs that include the International Symbol of Accessibility. Signs for van spaces must include the words “van accessible.” The signs must be mounted at least 60 inches above the finish floor or ground surface, measured to the bottom of the sign.

The only exception is a site with four or fewer total parking spaces, which most hotels far exceed.

4. What Lobby and Front Desk Signs Should a Hotel Have?

A lobby sign with the hotel name and logo confirms arrival and reinforces the brand, usually in dimensional letters, metal, or acrylic behind the front desk or on a feature wall. Clear Registration, Elevators, Restrooms, and Meeting Rooms signs tell guests where to go next. Signs that identify permanent rooms, like restrooms, fall under the ADA rules in section 6.

5. What Interior Wayfinding Signs Does a Hotel Need?

Interior wayfinding signs usually work at three levels:

  • Elevator lobbies: Directional signs at each landing point to room number ranges, stairs, and amenities.
  • Corridors: Room number range signs at intersections tell guests which way to turn.
  • Directories: Larger properties and resorts benefit from directories or property maps at main decision points.

Do hotel directional signs need to meet ADA requirements?

Directional and informational signs about interior spaces must meet the visual character requirements of Section 703.5 of the 2010 ADA Standards, such as character height, contrast, and non glare finishes. They do not need raised characters or braille.

6. What ADA Signs Are Required in a Hotel?

The 2010 ADA Standards require tactile signs, with raised characters and braille, at permanent rooms and spaces. The ADA’s own guidance lists room and floor numbers, restroom signs, and room names as examples. For a hotel, that includes guest room numbers as well as permanent spaces like restrooms, fitness rooms, and meeting rooms.

Where should tactile hotel room signs be mounted?

Under Section 703.4 of the 2010 ADA Standards:

  • Height: Tactile characters must be at least 48 inches above the floor, measured to the baseline of the lowest tactile character, and no more than 60 inches, measured to the baseline of the highest tactile character.
  • Location: At a single door, the sign goes alongside the door on the latch side. At double doors with one active leaf, it goes on the inactive leaf. At double doors with two active leaves, it goes to the right of the right hand door.
  • Clear floor space: The sign must be located so there is an 18 inch by 18 inch clear floor space centered on the tactile characters, beyond the arc of the door swing between the closed position and 45 degrees open.

Which exit signs need braille?

Doors at exit passageways, exit discharge, and exit stairways need tactile signs with raised characters and braille, separate from the illuminated exit signs.

Which hotel signs do not need to meet the ADA sign rules?

The 2010 ADA Standards list several exceptions, including building directories, menus, occupant names, building addresses, company names and logos, and temporary signs posted for seven days or less.

For more on our accessible signage, see ADA Signs.

7. What Fire and Life Safety Signs Does a Hotel Need?

Evacuation diagrams

The International Fire Code, which Phoenix and Scottsdale both adopt with local amendments, requires a diagram showing two evacuation routes to be posted on or immediately adjacent to every required egress door from each hotel or motel sleeping unit. In practice, every guest room needs its own diagram showing the routes from that specific room.

Exit and other life safety signs

Illuminated exit signs and other code required life safety signs are typically shown on the building’s plans. Decorative and wayfinding signs should never block or compete with them.

8. What Amenity and Event Signs Should a Hotel Plan For?

Amenity signs help guests find the pool and spa, fitness center, restaurant and bar, guest laundry, and meeting rooms. Meeting and event information changes constantly, so interior signs with changeable inserts or printed panels let staff update room assignments without replacing the sign.

Pool signs carry extra rules. Under the Maricopa County Environmental Health Code, a pool or spa operated for the residents of lodging such as hotels, motels, and resorts is a semipublic pool or spa regulated by the county, so pool rule signs should match the county’s current requirements.

9. What Materials Work Best for Hotel Signs in Arizona?

Intense sun, heat, and monsoon storms make aluminum, metal letters, UV resistant finishes, and weather resistant hardware common choices. See the best options for durable outdoor business signs in Arizona’s climate.

10. Do Hotel Signs Require Permits in Phoenix or Scottsdale?

Most exterior hotel signs do. The specific rules depend on the sign type, size, location, and zoning.

What should Phoenix hotels know?

The Phoenix Zoning Ordinance, Section 705, requires a sign permit before most signs are erected, displayed, relocated, or altered. Signs not visible from public streets or from one property to another are exempt, as are on site directional signs whose sole purpose is direction or location, though they must still meet the ordinance’s general requirements.

Larger signs, such as ground signs over 35 square feet with a structure over 6 feet tall, need engineered plans sealed by an Arizona registered engineer or architect.

City of Phoenix Sign Requirements

What should Scottsdale hotels know?

Scottsdale requires permits for all permanent signs before installation, submitted through the Scottsdale SPUR portal. Commercial signs must be installed by an Arizona licensed general or sign contractor, and the first inspection must happen within 180 days of permit issuance or the permit expires.

City of Scottsdale Sign Regulations, Processes and Permits

Do we have to handle the permits ourselves?

No. Phoenix Sign Studio handles sign permitting for our projects and confirms the requirements for your specific site before fabrication. See our sign permitting page and our article Who Handles Commercial Sign Permits in Phoenix and Scottsdale?

11. What Information Does a Sign Company Need Before Quoting Hotel Signs?

InformationWhy It Matters
Property addressIdentifies the city, zoning, and fire code that apply
Number of buildings and floorsAffects address, building identification, and wayfinding needs
Site plan and floor plansShows entrances, driveways, corridors, and room layouts
Brand standards, if anySets logo, color, and sign type requirements
Photos of existing signs and mounting locationsShows conditions, sightlines, and what can be reused
Room count and room numberingDetermines the quantity of room identification signs
Amenities and meeting spacesDetermines amenity and event sign needs
Project timelineAffects design, permitting, and installation scheduling

More detail: What information does a sign company need to give me an accurate commercial sign quote?

12. How Can a Hotel Manager Audit Existing Signs?

Walk the property the way a first time guest would:

  • Street: From each main direction, day and night, can you spot the hotel and its entrance before you need to turn?
  • Driveway and parking: Is it clear where to stop for check in, self park, or valet?
  • Address: Is the address visible from the street, and can each building be identified from the drive?
  • Lobby to room: Are elevators, room number ranges, and corridor turns clearly marked?
  • ADA signs: Do room, restroom, and exit stair door signs have raised characters and braille at the correct height and location?
  • Evacuation diagrams: Does every guest room have one that matches the current floor plan?
  • Priorities: Start with code required signs and anything that gets guests lost, then plan brand updates.

How Does Phoenix Sign Studio Approach Hotel Signage?

Phoenix Sign Studio designs, fabricates, and installs hotel signs for properties in Phoenix, Scottsdale, and surrounding communities.

Every project starts with how guests arrive and move through the property. We plan one system covering identification, code required signs, wayfinding, and amenities, and we handle permitting and installation. Ken Galvin, President, works directly with hotel managers and ownership groups.

Frequently Asked Questions About Hotel Signs in Phoenix and Scottsdale

What signs does every hotel need?

At a minimum: exterior identification, fire code compliant address identification, tactile ADA room signs including guest room numbers, evacuation diagrams at each guest room door, and accessible parking signs.

Do hotel room number signs need braille?

Yes. Guest room numbers identify permanent rooms, so they need raised characters and braille, mounted 48 to 60 inches above the floor on the latch side of the door.

Does every hotel room need an evacuation map?

Yes. The International Fire Code, adopted by both Phoenix and Scottsdale with local amendments, requires a diagram showing two evacuation routes on or immediately adjacent to every required egress door from each hotel or motel sleeping unit.

Can a Scottsdale hotel have a digital sign outside?

No. Scottsdale does not allow exterior digital or electronic message displays for hotels.

How big do hotel address numbers need to be?

At least 12 inches high in both cities. Scottsdale requires a 2 inch stroke on commercial properties. Phoenix also requires illumination, with added rules based on building type and size.

Do hotel signs need permits in Phoenix and Scottsdale?

Most exterior hotel signs do. Phoenix requires permits for most signs, with limited exceptions, and Scottsdale requires them for all permanent signs. Phoenix Sign Studio handles permitting for our projects.

Can Phoenix Sign Studio help with hotel signs?

Yes. We provide design, fabrication, permitting, and installation for monument, building, lobby, wayfinding, and ADA signs.

Need Hotel Signs in Phoenix or Scottsdale?

Whether you are opening, rebranding, or renovating, Phoenix Sign Studio serves hotels and resorts throughout Greater Phoenix, including Scottsdale, Mesa, Chandler, Tempe, and surrounding communities.

Schedule a consultation with Ken Galvin, President of Phoenix Sign Studio, or call (602) 610-8808 to discuss your hotel signage needs.

Schedule Your Hotel Signage Consultation With Ken Galvin

Phoenix Sign Studio | Commercial Signage | Greater Phoenix, Arizona

Next
Next

what signs does a warehouse loading dock need